AT130 Gamma Beam Irradiator with Calibration Bench
Reference gamma beam irradiator with calibration bench is designed to simulate and transmit air kerma, exposure dose, individual dose equivalent and dose equivalent units and their respective rates into working standards and measurement instruments during verification, calibration and test procedures.
- Contact：
- 010-68460051
- 15801367013
- Brand Introduction:
- Scientific Production Unitary Enterprise "ATOMTEX" is the leading research and manufacturing centre of the Republic of Belarus and one of the world leaders in the design and manufacture of equipment for nuclear measurements and radiation monitoring. ATOMTEX was established in 1995 as a subsidiary of Minsk Scientific and Research Instrument-Making Institute. Our team is highly qualified professionals with vast experience in the field of nuclear instrumentation created in this oldest research centre. Engineering research centre, production and service facilities has staff of 190 people. ATOMTEX products are highly demanded in such areas as nuclear energy, medicine, production sector, environmental monitoring, safety control and research activities. Our product range includes more than 100 different nuclear instrumentation products, which are well known to professionals in 80 countries all over the world. Own high-precision and multifunctional metrological infrastructure, commitment to innovative ideas and advanced technologies, as well as orientation to international standards – all this helps us create state-of-the-art products of high scientific and technological level, which are user-friendly and robust. Continuous co-operation with leading national, foreign and international organizations will propel us in our continuous progress and improvement.
- more>>
- Features
- Technical Parameters
|
伽马放射源及其最大活度 137Cs 60Co 241Am |
9.6x1013Bq（2600Ci） 7.2x109Bq（0.2Ci） 1.6x1010Bq（0.4Ci） |
| 比释动能范围 | 0.36uGy/h - 4836mGy/h |
| 瞄准单元 | φ60mm或90mm，长度150mm |
| 辐射发生器高度 | 1500±30mm |
| 放射源位置精度 | ±1mm |
| 放射源放置时间 | ＜20s |
| 存储时放射源的本底辐射 | 0.60uSv/h |
| 基本误差 | ±4-7% |
| 操作距离 | 0.3-7m |
| 水平位置再现性 | ＜0.5mm |
| 定位器最小移动距离 | 0.1mm |
| 定位器绝对误差 | ≤0.002R |
| 定位器速度 | 0.9mm/s到26cm/s |
|
定位器移动范围 垂直于地面 水平 平行于辐射发生器（Y轴） 垂直于辐射发生器（Z轴） 旋转 |
1250到1550mm ±50mm ±140mm 360°，每15°一阶 |
|
可拆卸部件重量 在定位器托盘上的部件 在定位器平台上的部件 |
35kg 75kg |
| 开机预热时间 | ≤1min |
| 连续操作时间 | ≥24h |
| 电源 | 230±23V，50±1Hz |
| 功率 | ＜1000VA |
| 操作温度 | +15℃到+25℃ |
| 相对湿度 | 80% |
|
尺寸 辐射发生器 底座 定位器平台 定位器托盘 工作台 |
640x640x1950mm 8000x860x200mm 910x855x1820mm 270x330mm 3500x1500mm |
|
重量 辐射发生器 底座 定位器平台 放射源保存装置 工作台 |
1370kg 135kg 70kg 100kg 150kg |
| 工作间尺寸 | 10x5x3.5m |
Address: UNIT 2508A, 25/F BANK OF AMERICA TOWER 12 HARCOURT ROAD CENTRAL HONG KONG
Tel：010-68460051 Mobile：15810972800